Touch & Sound

by Juan Pablo García Sossa
Making some noise with Skintimacy and a speaker.

Speaker

Touch & Sound is a simple example to start making sound with your Skintimacy using a speaker.

You can download the code here: SpeakerSkintimacy

SpeakerSkintimacy-09

You will need to connect your Skintimacy to your Wiring Board as shown. In this case you will only need to use Player 1 and Master to make some sound with a speaker.

You will need a 9v Battery, four (4) Crocodile Clips, some wires, a speaker, your Wiring Board and of course your Skintimacy.
All

Notice that In- on your Skintimacy, goes to Wiring’s GND and to the Battery -
Battery

While In+ goes just to the Battery +
DaSpeaker

Player1 should hold in this case the blue wire’s end and the Master the green wire’s end
Touch&Sound

Skintimacy players are connected to Analog In on your Wiring. When Player1 and Master touch each other, the WiringLED should turn on.
Pins